Features

  • Ready to use
  • Automatic calibration
  • One button functionality
  • Rechargeable battery through USB

Permeability Detector V.2 measures the permeability of the test object and displays the result on a built-in LCD. The LED turns green when the material has ferromagnetic properties and red when it is not ferromagnetic, e.g. Aluminum, copper, etc.

What is ferromagnetic and what is not?

TAM has developed a metal-alloy analyser that can determine if a shaft material is suitable for magnetic principle Torque Sensors. The Permeability Detector is small and easy to use.

The Non-Contact Torque Sensors from TAM (Active-3 Technologies) are suitable for any Ferro-magnetic material and can measure the Torque and Bending forces from any shaft size. The Permeability Detector from TAM determines within seconds what “is” and what “is not” ferromagnetic. The hand held tool proves to be very useful when dealing with an application where an Active Sensor is retrofitted, or when checking the stock of raw materials before tooling the Test-Object.

Once the activation button is pressed, the Permeability Detector initialises and is readily available to analyse the test materials. While keeping the activation button pushed down, the Permeability Detector is then gently pressed against the Test-Object and within a split second.

This is a nonabrasive and completely neutral solution to get an answer to an important question that may otherwise take a much longer time or may accidentally permanently magnetise the Test-Object.

The on-board multicolor LED and the on-board OLED display show the test results: Not suitable material (red LED) or suitable material (green LED) and a numerical analysis of the „to-be-expectetd“ sensor performance (0 = poor, 12= very good)

The Permeability Detector is part of the TAM Professional Sensor Kits, the A3-PL or the A3-M.
The Permeability Detector can also be purchased separatley.“

Permeability Detector Video